Remove Dents From a Car: 9 DIY Methods Explained

Remove Dents From a Car 9 DIY Methods Explained

There are three certain things in life: death, taxes, and dents in a car! What's worse than getting dents in your newly purchased car? Nothing. Right?

You can’t avoid getting these whatever you’re an expert and careful driver. Dents are common to all.

Dents may cost a few hundreds of dollars to fix it in a repair shop. You can remove dents from a car using simple household items. Wondering how?

Here We have explained 9 easy DIY methods to repair dents. Scroll it down!

How to Remove Dents From a Car - 9 Methods Explained

1. Using Hair dryer & Compressed Air

Rapid change of temperature can make the dent pop out. Using household products like a hairdryer and compressed for removing a car dent is a popular method.

Equipment needed: aluminum foil, gloves (rubber coated), a hairdryer, and a can of compressed air.

Wear gloves before starting the process. Heat the dent on your car at the highest temperature using the hairdryer by covering it with aluminum foil.

Keep the hairdryer at least 6 feet away from the surface. When it is hot enough, turn the compressed air from upside down and start spraying the area. 

By this, the dent will pop up.

2. Using a plunger

Plungers are not only used in unclogging toilets but it can also be used in removing small to medium dents in your car.

You need to splash some water on both the dent and the plunger. Keep pulling it until the dent pops up.

We recommend you use a flange plunger or a cup.

3. Using boiling water

Apply boiling water to your car’s plastic bumpers and other parts made of plastic. Plastics are flexible and easy to pull it back.

After boiling a full pot of water, pour it over your cars dented area. Take the bumper off if you cant reach the dent well. 

Then pour cold water on the plastic bumper to fix the area.

4. Using Dry Ice

Dry ice is really a very effective way to get a dent out of your car. Wear protective gloves to rub dry ice to the dent that can pop the dent out. 

Apply dry ice directly to the damaged area as many times as you need. For better results, you can heat the area before applying dry ice. 

5. Using a vacuum cleaner and a bucket

Get your car dent out using a vacuum cleaner and a bucket. Wondering how? Follow the steps:

Put a small hole to the bucket bottom and try to cover the dent by its upper part.

Then the vacuum cleaner tube should be put over the hole. 

Start turning the vacuum cleaner until it pops out. This method is not suitable for deep and bigger dents.

6. Using a Specialty Tool

When all the methods fail, Invest in a specifically designed tool to pop your car's dents up. These tools are designed in such a way that they can produce enough amount of force to pull them out. 

Remember- these tools are not appropriate for any kind of dent. So, doing it yourself is suggested.

7. Repair Car Dents with PDR

PDR (Paintless dent repair) is a process done by the dent wizard technicians to remove dents safely without affecting the original paint finish.

Paintless dent repair helps you repair your car dents more affordably than the traditional workshop methods.

A dent wizard is used to do this method which has become more popular since 1983. It will surely bring your 100% satisfaction and hold your car’s resale value.

8. Using a Long Metal Rod & Knockdown

In some dents, the edges surrounded by the dent come upward. So, popping it up may not be the ultimate solution. 

We recommend you to work on both sides for these types of dents. Use a metal rod or hammer inside and a wooden or rubber knockdown on the outside. 

We suggest wooden or rubber knockdown flatten it because they don't damage the paint to finish.

9. Using Screws, Hot Glue, Wooden Dowels

Attempting to pop dents out by yourself may be risky for your car. You may damage your car's surface, make the dent worst, and destroy the paint. 

You can safely take the dents out using screws, hot glue, wooden dowels.

Put two nails on each side of the jewels and apply hot glue on its bottom surface. Place the dowels around the dented area.

Let the glue dry and pull them until the dent comes out.

Ensure enough glue and patience for this process. Rubbing alcohol or heat can detach the glue.

Conclusion

Hopefully, you'll have some success using these DIY methods to get dents out of your vehicle. We suggest you use outdoor car covers to eliminate potential damages. 

Be careful in backing up to the parking where the dents occur.

FAQs  

What Causes Car Dents?

Collision with other objects or vehicles causes the dents. Usually, cars get dents in the parking lot. Sitting on your vehicle and flying sports equipment like balls may also result in dents.

How Much Does Hood Dent Repair Cost?

When you get dents on your car's hood, the best option is a professional hood dent repair. You may have to pay between $150 and $500 for that.

How Can I Prevent a Hood Dent?

Prevent hood dents by parking your car inside your garage. Protective covers may protect your hood from flying rocks. 

Never allow anything to sit on your hood.

Can a Dented Hood Cause Mechanical Problems?

Of course! dents on your hood lead to pooling in the rain that may cause rust and other problems. Deep dents on a car's hood may cause mechanical damages too.

Can a car dent pop out on its own?

Yes! Small dents can pop out on its own. In some cases, few DIY works, patience, time, tools, and skills are required to pop your dents up.


Sale

Unavailable

Sold Out